Gulf Super Duty LE 20W-50
Gulf Super Duty LE
Gulf Super Duty LE series are high performance heavy duty diesel engine oils developed for modern diesel engines running on low sulphur diesel fuel. These are blended from highly refined base stocks and selected additives to provide excellent performance under all types of operating conditions. These oils are API CH-4 licensed. SAE 15W-40 meets the requirements of all major North American heavy-duty diesel engine manufacturers and can be used in a variety of applications. Gulf Super Duty LE, SAE 30 is approved against ZF TE-ML 02H and 04B
Features & Benefits
- High oxidation stability reduces sludge build up & viscosity increase to facilitate long drain intervals
- Improved detergency reduces deposits and enhances engine cleanliness
- Better soot handling capacity helps control oil thickening and wear
- Effective anti wear properties protect engine parts against wear to extend engine life and reduce maintenance costs
- Good corrosion inhibition properties provide protection against rust and corrosion
Applications
- Turbocharged and naturally aspirated diesel engines of major North American engine manufacturers
- On highway light and heavy duty trucking including high speed-high load service and short haul pick-up/delivery van
- Heavy duty diesel engines used in mining, construction, agriculture and other off road applications
- Gulf Super Duty LE, SAE 30 is suitable for use in ZF transmissions in vans, busses and trucks, offering extended drain intervals as compared to ZF TE-ML 02A oils, where such quality oils are recommended.
Specifications & Typical Properties
|
Meets the following Specifications |
30 |
15W-40 |
20W-50 |
|
|
API-CH-4 |
X * |
X |
X |
|
|
API CG-4, CF-4, SJ |
|
X |
X |
|
|
Daimler MB 228.1, 229.1 |
|
X |
|
|
|
Mack EO-M, EO-M Plus; MTU Oil Category 1 |
|
X |
|
|
|
Cummins CES 20071, 20076; MAN M 271 |
|
X |
|
|
|
Has the following Approvals |
||||
|
API-CH-4 |
|
X |
X |
|
|
ZF TE-ML 02H, 04B (ZF Approval Number: ZF001147) |
X |
|
|
|
|
Typical Properties |
||||
|
Test Parameters |
ASTM Method |
Typical Values |
||
|
Viscosity at 100 C, cSt |
D 445 |
11 |
14.50 |
18.9 |
|
Viscosity Index |
D 2270 |
111 |
135 |
123 |
|
Flash Point, C |
D 92 |
225 |
220 |
230 |
|
Pour Point, C |
D 97 |
-33 |
-27 |
-24 |
|
TBN, mg KOH/g |
D 2896 |
9.2 |
9.20 |
7.9 |
|
Density @ 15C, Kg/l |
D 1298 |
0.892 |
0.894 |
0.866 |
|
Sulphated Ash, wt% |
D 874 |
1.18 |
1.20 |
1.09 |